Made In USA
CNC Milling / Turning
CNC machines work by rotating the raw material, which could be (round barstock, hex barstock, tubing, a casting, a forging, a slug, etc.)
Our Multi-Spindle Screw Machining Services have been in business for over 75 years. Our in-house engineers will design how each part will be tooled to run as efficiently as possible. We have over 250 pieces of 6 & 8 Multi-Spindle and Automatic screw machine equipment including 18 Wickman machines as well as an additional 60 Davenport, 200 ACME Gridley machines as well as 10 Tornos machines. We also offer CNC Multi-Spindle machined parts. Our Multi-Spindle capacity goes from 5/8 diameter to 3 1/4 inch diameter machines.
The first Multi-spindle machines were designed in the early 1900s. The goal was to machine parts much faster than conventional lathes. The key factor that allows Multi-Spindle machines to be so efficient is centered on the ability to split up the required operations into different spindles. Each operation such as drill, turn, screw, bore, shave, form, ream, knurl and others can be spread among different spindles that operate simultaneously. Whichever operation takes the longest cycle time to complete is the one that determines the total cycle time of the entire part.
Capabilities
| Machine Capacities | Our facility has 38 Multi-Spindle automatic screw machines that can run parts ranging from .276 inces to 3 1/4 inches. We also have over 70 other pieces of CNC turning/milling & CNC Swiss machines. |
| Raw Materials | Steel, Stainless steel, Aluminum, Brass, Bronze, plastics, extrustions as well as tubing and practically any raw material. |
| Industries Served | Fiber Optic, Hydraulic, Medical components for surgical equipment, Industrial applications, Agriculture, Motorcycles, Pumps, Medical components for carts/beds, Oil & Gas industry, Appliance industry, Lock industry, Motor sports, Mining, RV Industry, Safety components, Switches & Connectors, Transmission components, Small Engine, Lawn and Garden, Recreational Vehicles, Industrial Packaging, Furniture applications, HVAC, Lighting Industry and many others. |
| Common Applications | Almost anything. Hydraulic components, water fittings, valve stems, air brake components, bleed screws, pump components, threaeded bushings and many others. |
| Turnkey Line Ready Parts | We have decades of experience taking responsibility for delivering line ready parts requiring almost any secondary operation including, heat treating, plating, grinding, honing, painting & assemblies. |
| VMI (Vendor Managed Inventory) | Our facility has decades of experience doing VMI, Kan Ban, JIT & EDI. |
| Quality | ISO 9001:2015 Certified & ITAR Registered. |
Lowest Total Cost
Design For Manufacturability
Technology & Automation
Increased Turns & Reduced Lead Times
Additional Information
Benefits of Partnering with Our Multi-Spindle and Automatic Machining Facility
- Our manufacturing facility has 38 Multi-Spindle automatic screw machines that can run parts ranging from .276 inches to 3 1/4 inches. We also have over 70 other pieces of CNC turning/milling & CNC Swiss machines.
- Our facility has been in business for over 70 years and we are in excellent financial shape.
- Our engineers have decades of experience in machining. We will review each part and make sure it is being run on the machine that is most economical.
- We have strong project engineers to help projects move from concept into full production.
- Our customer service team has decades of experience doing Vendor Managed Inventory. We ship bar-coded products via Kan Ban, EDI, JIT, or practically any release system.
- Our facility runs 3 shifts 24 hours per day 5 days per week.
- Raw Materials: Steel, Stainless steel, Aluminum, Brass, Bronze, plastics, extrusions as well as tubing, and practically any raw material.
- Industries Served: Fiber Optic, Hydraulic, Medical components for surgical equipment, Industrial applications, Agriculture, Motorcycles, Pumps, Medical components for carts/beds, Oil & Gas industry, Appliance industry, Lock industry, Motorsports, Mining, RV Industry, Safety components, Switches & Connectors, Transmission components, Small Engine, Lawn and Garden, Recreational Vehicles, Industrial Packaging, Furniture applications, HVAC, Lighting Industry and many others.
- Common Applications: Almost anything. Hydraulic components, water fittings, valve stems, air brake components, bleed screws, pump components, threaded bushings, and many others.
- Turnkey Line Ready Parts: We have decades of experience taking responsibility for delivering line-ready parts requiring almost any secondary operation including, heat treating, plating, grinding, honing, painting & assembling.
- VMI (Vendor Managed Inventory): Our facility has decades of experience doing VMI, KanBan, JIT & EDI.
- Quality: ISO 9001:2015 Certified & ITAR Registered.
- Low Medium and high volumes: We generally want to run 30,000 pieces or more on our Multi-Spindle automatic machines but we have over 70 pieces of additional CNC Swiss & CNC turning/milling for low volume requirements.
- We have a robust quality department with the ability to fully inspect every part that we produce. CMM machines, roundness machines, 10 different vision systems, air gauging, pin gauges, and any basic gauges required.
- In-house laser marking capabilities: Automatic bagging machines, automated O-Ring assemblies, a wide variety of assembly capabilities.
Common Applications of Multi-Spindle & Automatic Screw Machines include almost anything:
- Hydraulic components
- Water fittings
- Valve stems
- Air brake components
- Bleed screws
- Pump components
- Threaded bushings
- ..and many others
Commonly used materials include:
- Steel
- Stainless steel
- Aluminum
- Brass
- Bronze
- Plastics
- Extrusions as well as tubing
- ..and practically any raw material
- Fiber Optic
- Hydraulic
- Medical components for surgical equipment
- Industrial applications
- Agriculture
- Motorcycles
- Pumps
- Medical components for carts/beds & Equipment
- Oil & Gas industry
- Appliance industry
- Lock industry
- Motor sports
- Mining
- RV Industry
- Safety components
- Switches & Connectors
- Transmission components
- Small Engine
- Lawn & Garden
- Recreational Vehicles
- Industrial Packaging
- Furniture applications
- HVAC
- Lighting Industry
- ..and many others
The first Multi-spindle machines were designed in the early 1900s. The goal was to machine parts much faster than conventional lathe machines. The key factor that allows Multi-Spindle machines to be so efficient is centered on the ability to split up the various required operations into different spindles. Each operation such as drill, turn, screw, bore, shave, form, ream, knurl and others can be spread among different spindles that operate simultaneously. Whichever operation takes the longest cycle time to complete is the one that determines the total cycle time of the entire part.
The key factor that allows Multi-Spindle machines to be so efficient is centered on the ability to split up the various required operations into different spindles. Each operation such as drill, turn, screw, bore, shave, form, ream, knurl and others can be spread among different spindles that operate simultaneously. Whichever operation takes the longest cycle time to complete is the one that determines the total cycle time of the entire part.
Machine Capacities: = Our facility has 38 Multi-Spindle automatic screw machines that can run parts ranging from .276 inches in diameter to 3 1/4 inches in diameter.
Explore Other Machining Solutions
Explore Machining
CNC Swiss Machining Services
The concept of the Swiss machine is that the raw material bar itself moves towards the cutting tool that is doing the work rather than the tool traveling to the bar.
Hydromat Machining
Hydromat machines are a type of rotary transfer machine that utilizes both hydraulically driven and CNC driven motors.
Do you have questions? Give us a call
Fill out the form and a Component & Device Sales, Inc. representative will contact you shortly
